Jump to content

Tiger River Bengal Spa Model M 2003 control unplugged Light ON


Recommended Posts

Hello all,

OK, I have learned (mostly from reading on here) that the control unplugged light is coming on after the system power cycles, at that point no display and red blinking power light.

I would love to test for this error, but not sure if there is a way...? Local tech wants me to purchase new IQ and top panel... is this my only option?

Thanks, grateful to have found this forum!





I purchased this tub used, but in good shape always keep in a porch since purchased new. I knew it had a bad value (behind the main controller) which was leaking, got the value replaced and no more leak. However, removing and reinstalling the main controller has caused the top side control to come on, it displays 8888, power light is solid red, for 30 secs or so then I hear a click and display goes blank, and red power light goes to blinking red. The cir pump is working and moving water. I kept a sm heater in the cabinet for a few weeks and have done the power test a few times with no change (because its winter and I saw this could be an issue). I am wondering if we missed a jumper, or something as everything "was" working. Tech says buy a new top side and controller, a lot of money. I want to be sure its actually broke... help...





Edited by LeesSpa
fixed sentence
Link to comment
Share on other sites

  • LeesSpa changed the title to Tiger River Bengal Spa Model M 2003 control unplugged Light ON
  • 8 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...