Craigk Posted December 3, 2021 Report Share Posted December 3, 2021 We ordered expected delivery in February. I’ve just realized a possible issue with cover clearance height. The location for tub in on a concrete patio ground level, but has an overhang balcony above, with low ceiling. Im not sure how the cover will unfold. Could someone measure the total height from bottom of spa to highest height unfolding cover? Thanks in advance!! Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted December 3, 2021 Report Share Posted December 3, 2021 Spa is 33" tall and 84" wide so half of the 84" measurement to fold it is 42" the second fold to fully open should be close to the same (42") so my guess would be 33 + 42= 75" and add a couple on to that 77" Quote Link to comment Share on other sites More sharing options...
Craigk Posted December 3, 2021 Author Report Share Posted December 3, 2021 That’s what I was afraid of. I have 74” unfortunately. Thank you!! Quote Link to comment Share on other sites More sharing options...
Craigk Posted December 3, 2021 Author Report Share Posted December 3, 2021 The thickness of the cover will add to this fold height I’m assuming- Quote Link to comment Share on other sites More sharing options...
ratchett Posted December 5, 2021 Report Share Posted December 5, 2021 On 12/3/2021 at 6:56 PM, Craigk said: That’s what I was afraid of. I have 74” unfortunately. Thank you!! I've got a standard Jetsetter (not the LX) - so mine is 29" tall. Just went outside to check for you - with the cover half open, I'm measuring around 73 inches tall although due to the rounded corners, I didn't get an *exact* measurement. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.