Bravo2010 Posted December 2, 2021 Report Share Posted December 2, 2021 Hey Folks, Hoping you can give me some advice/opinions. Brand new 19 x 36 Grecian, above ground pool. Liner was installed and next day there were large wrinkles about 4 ft. out from the steps at the shallow end. Installer returned (3 x) to correct the issue. As a result, when you stand at my steps looking to the deep end, on one side wall the seam is above the cove and on the adjacent side it is about 4 inches out from the cove on the floor. This is due to the fact that he took the wrinkles out to one side. I can't tell you how bad this bothers me simply because the liner was balanced before and now it looks kind of "wonky". This is a blue liner and the seams are almost white so very visible. Tell me I'm crazy or have a right to be upset. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.