Jump to content

Gecko YE-3-CE IN.YE-3-H3.0


Michal

Recommended Posts

Hi,

I just got my first hot tub and I am super exited about. Since I am located in south Poland we have a pretty cold winters and I need some help. I have a CP running 24/7 and I cannot change it with my in.k800 .

 

My setup is :

2 x 3hp pumps

1x UV

1x Ozone 

1x Blower

1 x CP

Two 3HP pumps and a blower  are connected to A1 A2 A3 and CP With Ozone is connected directly to the board.

 

My question is : Is there any anything I can do so my CP won't be on 24/7 and I can set up filter cycles with my in.k800?

 

P.S . I made a huge mistake buying from a dealer that has no idea about hot tubs and is selling garden equipment. Sorry for my english as well:)

 

Link to comment
Share on other sites

See page 2 below

https://issuu.com/geckomkt/docs/inye3_ye5_ce_qsc_en?e=14165552/44051896

You might also want to contact Gecko Europe to verify what Lower Level (LL #) setting will work best for your spa and how you want to set it up

https://gdeuro.com/contact-us

Link to comment
Share on other sites

1 hour ago, CanadianSpaTech said:

See page 2 below

https://issuu.com/geckomkt/docs/inye3_ye5_ce_qsc_en?e=14165552/44051896

You might also want to contact Gecko Europe to verify what Lower Level (LL #) setting will work best for your spa and how you want to set it up

https://gdeuro.com/contact-us

CanadianSpaTech….. can you HELP!

 

My Hydropool Serenity 5000 after running for 30 minutes (works perfect) trips the main 100 amp breaker feeding my sub panel where my spa is fed from? 
 

Seems like it’s calling for another pump to come on it something with a short in it? 
 

I haven’t tried cleaning the filter yet, just thought of it tonight. 
 

can you help????

Link to comment
Share on other sites

20 hours ago, CanadianSpaTech said:

See page 2 below

https://issuu.com/geckomkt/docs/inye3_ye5_ce_qsc_en?e=14165552/44051896

You might also want to contact Gecko Europe to verify what Lower Level (LL #) setting will work best for your spa and how you want to set it up

https://gdeuro.com/contact-us

I have 338 rev.3 software , I don't have LL option like on the pdf you posted, do you think upgrading my soft to rev. 10 would help?On the pic below , you can see where my CP is connected (N to p57 , L to P51) 

y3 conn.jpg

Link to comment
Share on other sites

You might have to upgrade to get what you want https://issuu.com/geckomkt/docs/instik_upgrade_spa_en/1?e=14165552/32069580

I would contact Gecko Depot Europe before buying to see if it can be done without having to upgrade the software. Their tech support is usually very helpful. The spa manufacturer might have their own programming installed to make the pack proprietary to them.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...