Jump to content

In.xm spa pack P1 not working, but no errors


GregB

Recommended Posts

I recently got a spa from a friend, spa was supposedly working prior to emptying. Hooked it up, everything powered on, P1 pump ran for about 2 minutes then stopped. Tried everything, looked at the manuals, nothing. Replaced the pump and cable with new, still nothing, wouldn't turn on. Everything else seems to work fine.

Replaced the spa pack with a new in.xm. hooked everything up, pump turned on, YAY! 2 minutes later pump stopped, no errors, reset spa pack, nothing. Am I missing something here?? The spa pack is turning the pump on (it thinks, I hear it click when I cycle the pump from low to high and off) but the pump doesn't run. 

Really hoping someone here might have an answer for me, been working on this for weeks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...