TJBVa Posted September 26, 2021 Report Share Posted September 26, 2021 I have a Hot Spring Vista - circa 2008. The heater is leaking from the pressure switch end. I am trying to identify the model number of the heater, but the numbers on the sticker don't line up with what I have found online. There are also sites that talk about yellow and green tape - but mine is red. See attached for pics. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted September 27, 2021 Report Share Posted September 27, 2021 240v4kw is all you need to worry about. It might be an internal leak at the pressure switch. https://www.poolspaforum.com/forum/index.php?/topic/54013-pumps-replaced-now-have-a-leak-from-inletoutlet-end-of-heater/&do=findComment&comment=211141 Quote Link to comment Share on other sites More sharing options...
castletonia Posted September 27, 2021 Report Share Posted September 27, 2021 OEM Replacement heater would be part #76228 which is a 4kW heater w/pressure switch. You could also use part #73791 which would require a pressure switch jumper since it does not have a pressure switch. Quote Link to comment Share on other sites More sharing options...
TJBVa Posted September 27, 2021 Author Report Share Posted September 27, 2021 Thanks castletonia! I assume there is a substantial difference between the HydroQuip replacements and OEM, given the large price difference? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.