FLO error Posted September 14, 2021 Report Share Posted September 14, 2021 Hello I put in a new circulating pump as I had a FLO error. I have now changed the spa pack and spa control. I put in a IN-XE-5-11-H.0 spa pack and a K450 spa control. I have a 2 speed pump and a 1 speed pump as well as the circulating pump. I set the spa control to LL3 as suggested. I got the spa to heat to 100 degrees but overnight I now a FLO error again. I have removed the air from both pumps and removed both air filters but no luck. I have reset the breaker and tried again but no luck. Any suggestions would be greatly appreciated. I have a Lazy Boy refresh spa. thanks Dave Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted September 15, 2021 Report Share Posted September 15, 2021 Verify you have a circulation pump for heating and filtering. See pages 26-28 here: https://www.geckodepot.com/fichiers/documentsProduits/GDA/en/Techbook_in_xe_EN.pdf Try LL2 if no ozone or LL5 with ozone or program each component manually 1 Quote Link to comment Share on other sites More sharing options...
FLO error Posted September 16, 2021 Author Report Share Posted September 16, 2021 I tried setting it to LL2 and LL5. The hot tub is now heating, however I can’t get pump 2 to start. When I press pump 2 key nothing happens. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted September 16, 2021 Report Share Posted September 16, 2021 Test fuses. Did it work when you had the other LL setting? Quote Link to comment Share on other sites More sharing options...
FLO error Posted September 16, 2021 Author Report Share Posted September 16, 2021 I checked the fuses and they are good. I changed to LL5 and pump 2 still does not work. Then my temperature goes to ----. I then went to the light key and pressed it these are all the readings 102 temp then the time F5 12 FD 6 FF 2 EP 0 E5 12 ED 6 F 102 temperature is back. Heat is 102 and the circulating pump is running. Pump 1 works on both speeds but pump 2 does not register Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted September 16, 2021 Report Share Posted September 16, 2021 How long did you hold down light/program key? 30 seconds? Quote Link to comment Share on other sites More sharing options...
FLO error Posted September 17, 2021 Author Report Share Posted September 17, 2021 yes and I had pump 1 and pump 2 running once..sorry can't remember what LL setting it was on Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted September 17, 2021 Report Share Posted September 17, 2021 Try holding Pump 1 for 30 seconds to see if you can get to the manual sub settings for each component Quote Link to comment Share on other sites More sharing options...
FLO error Posted September 17, 2021 Author Report Share Posted September 17, 2021 and then what do I do Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted September 17, 2021 Report Share Posted September 17, 2021 See pages 26-28 in the tech manual. Posted link above and program the pack for each component instead of using a LL program number ie: pump 1- 2-speed= P1-2, pump 2 -1 speed =P2-1, ozone and so on. Were you able to get into that programming menu by holding pump 1 button? 1 Quote Link to comment Share on other sites More sharing options...
Kateg Posted September 18, 2021 Report Share Posted September 18, 2021 Filled my spa but now get an error flo and jets aren’t working Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted September 18, 2021 Report Share Posted September 18, 2021 7 minutes ago, Kateg said: Filled my spa but now get an error flo and jets aren’t working Please start your own thread with info and pics about your spa. Quote Link to comment Share on other sites More sharing options...
FLO error Posted September 19, 2021 Author Report Share Posted September 19, 2021 Before I make a mistake on programming this. i have 1 2 speed pump 1 1 speed pump 1 circulation pump 1 APG-U. (Advanced Plasma Gap Technology) universal voltage Del ozone that is an ozanator- correct Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted September 19, 2021 Report Share Posted September 19, 2021 correct 1 Quote Link to comment Share on other sites More sharing options...
FLO error Posted September 21, 2021 Author Report Share Posted September 21, 2021 Thank you for all your help. I am finally up and running with no problems. Thanks again 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.