Jump to content

Heater to hot


Recommended Posts

  • 2 weeks later...

Suggest you test for 240V across J100 and J101 when the spa is calling for heat and verify you have proper voltage coming off the circuit board. Might have a bad relay and the spa is only heating on 120V and that is why it is taking so long to heat now. 

  • Like 1
Link to comment
Share on other sites

Ok Remove the heater quick connect and inspect the prongs inside the quick connect to ensure they are good then test it there for power coming off the board when the spa is calling for heat.  If no power remove the circuit board and have a look on the back for burnt or darkened areas around the relays.

You have verified you have 240V at the red and black incoming wires? red to blk = 240V

I can see something metallic looking just above the heater quick connect behind the white Balboa sticker...What is it?

  • Like 1
Link to comment
Share on other sites

The heater light indicator is on and solid when testing? Because there is no burnt area on the back does not mean the relays are good. If you have 240 coming in to the board and the heat light is on and no error codes on the topside with no power coming off the board at the quick connect you need to find an electronics shop that can replace the relays. I normally have them do all the relays on the board. 

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...