Kels Posted July 11, 2021 Report Share Posted July 11, 2021 Hi everyone! We just got this hot tub from a family member. They had said they think it was struck by lightening as the control panel was fried. $400 later and we replaced the control panel.. now the heat continues to rise and the jets run for what it seems like forever? I’m not sure if filter cycles run the jets full power? We have a 2 pump so one side of the jets is running full power. This is a 2005 master spas, down east, Providence II. We’re not sure how to trouble shoot this? Or perhaps there is still an issue with the electric part of things. We had turned the breaker completely off earlier as we were worried it would over heat.. I attached a picture of the model of the hot tub as well Any advice and knowledge is so appreciated! Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted July 11, 2021 Report Share Posted July 11, 2021 1 hour ago, Kels said: we replaced the control panel. The topside (with the buttons and display), the circuit board, or the control pack? Post pics of the circuit board, wiring diagram, and equipment area. Are there any errors on the display? 1 hour ago, Kels said: it was struck by lightening as the control panel was fried. If lightning dedtroyed the control panel it also destroyed the board, and possibly damaged equipment (pumps, ozone, etc.) as well. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.