Jump to content

2005 Coast Spa (Bronze, Silver & Gold Series) replacement control panel?


Recommended Posts

 

@souper soaker how many buttons on topside? post photos

Manual here: https://manualzz.com/doc/6271927/coast-spas---gecko-depot

Generic replacement from Gecko part number  TSC-4-10K / K4...replaces TSC -46 

https://pool-spa-supplies.com/gecko-topside-panel-tsc-4-k-4-lg-rec-10-button-real-t-c-3-pmp-mspa-mp-bdltsc410k

I would verify with seller by phone if they actually have it in stock before ordering and also to make 100% sure it will work with your system.

  • Like 1
Link to comment
Share on other sites

@souper soaker Ok The generic Gecko replacement is a TSC 19/K 19 that replaces the Coast TSC-34. If you lift up the topside (or look up from underneath) you should see a white tag that identifies the topside. There might be 2 screws under the overlay one on each side. If you feel with your finger you can cut a little x in the overlay and remove them to do minimal damage to the overlay but if you are sure it's pooched then just peel back the overlay.

 

  • Like 1
Link to comment
Share on other sites

https://www.hottubessentials.ca/gecko-spa-controls/tsc-19-4-button-topside-control-panel.html

Located in Kelowna.

Again always phone and verify they have in stock and that it is the correct topside for your system/spa pack. You may be able to find cheaper option online.

2161 Shamrock DriveWest Kelowna BC V4T 1T9Canada(This is not a retail location)
Link to comment
Share on other sites

  • 1 month later...
  • 3 months later...
  • 7 months later...
  • 2 weeks later...

Hello, Moved into a home with this Coast Spa tub. Previous owners claimed that it worked and offered no other information. I cleaned it and filled it up. Jets run, but this is a slow leak that basically drains out after 2-days. Is it worth repairing?

Model: XSP40

Serial: 211674image.thumb.png.f9b594107e4c61ff2a3f9928023dae57.pngimage.thumb.png.9dd5d3a6410b3aa206b5d8298cd26ab4.pngimage.thumb.png.413ea3c0401764ff5e74c89602ec1eef.png

Edited by Vall
previously images were not loading
Link to comment
Share on other sites

  • 3 weeks later...

Have an issue with a oast Spa 2004.

TSC-21  Topside, after customer powered up all was fine, he then played with the various buttons after which only the temp controls respond, jets 1&2 no function, light no function, unable to take out of economy mode, unable to program filter cycles. Unable to find a suitable tech manual (we have owners handbook).  Not convinced the topside has failed though? 

Thanks. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...