ewalla Posted June 22, 2021 Report Share Posted June 22, 2021 This year we got went to open hot tub and our circulation pump is working perfectly. Control panel came on in “Protection mode” then went blank and hasn’t come on since. Now we have a solid green light on side and no blue light where before we had a solid green and blue flashing. Inside control panel when hot tub is powered up all green, then goes to green for bus status and red for control unplugged. I have unplugged the I2C in hopes it was just the light, but I couldn’t be so lucky. Please help!! IMG_2419.MOV Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted June 23, 2021 Report Share Posted June 23, 2021 8 hours ago, ewalla said: goes to green for bus status I have no idea what this means. 8 hours ago, ewalla said: red for control unplugged Check the controller wires for damage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.