johncasey37 Posted June 15, 2021 Report Share Posted June 15, 2021 Just started doing this 6/8/21. Even put the spa in "Rest" mode, but the temp stayed at 104. I have powercycled it, drained, filled and now it is holding at 102, but have it set at 86F. will give it one more day, then I guess I need a repair guy. Spa is 4 months old, 2021 model, balboa inside. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted June 15, 2021 Report Share Posted June 15, 2021 Is the spa running a lot? Check your filter cycle duration. If set to run for to long the pump shedding heat will heat the spa water above set point. Remove filters until issue is fixed Quote Link to comment Share on other sites More sharing options...
johncasey37 Posted June 15, 2021 Author Report Share Posted June 15, 2021 Filter cycle runs 30 minutes every 12 hours...If remembering right, that is less than the default. I think spa is used an hour a day. This is NOT how it has functioned the last 4 months... Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted June 15, 2021 Report Share Posted June 15, 2021 4 hours ago, johncasey37 said: Spa is 4 months old, 2021 model, It should be under warranty then. I'd call the dealer. Quote Link to comment Share on other sites More sharing options...
johncasey37 Posted June 15, 2021 Author Report Share Posted June 15, 2021 yes...I did just look at the "high" and "low" range. I have both set at 85F, spa still at 102F. Not exactly sure how those ranges work. thank You guys for the ideas. JC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.