steeda2h Posted June 12, 2021 Report Share Posted June 12, 2021 Got a used hot tub. Finally got it working right. Somehow I put it in ECN mode the other day and can’t figure out the combination to put it back into standard. It’s a balboa VS series. I’ve tried the temp button and jet 1. That gets me to filter cycle. Can’t find any info on putting it into ecn or standard. Maybe my mode button is not working? Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted June 12, 2021 Report Share Posted June 12, 2021 Should be the mode button. Press mode, use arrows to change, press mode again to save. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted June 12, 2021 Report Share Posted June 12, 2021 Press "Warm" or "Cool" first then Mode button. Topside is a VL701S https://balboadirect.com/images/docs/topside/40790_D.pdf @steeda2h @RDspaguy Quote Link to comment Share on other sites More sharing options...
steeda2h Posted June 12, 2021 Author Report Share Posted June 12, 2021 2 hours ago, CanadianSpaTech said: Press "Warm" or "Cool" first then Mode button. Topside is a VL701S https://balboadirect.com/images/docs/topside/40790_D.pdf @steeda2h @RDspaguy I’ve tried both ways. hit “warm” and touch “jet 1” and I can change filter hours touch “warm” then “mode”and nothing changes on display. I assume I should see “ecn” or “std” come up? Then be able to go up or down to select the setting? IMG_0534.MOV Quote Link to comment Share on other sites More sharing options...
steeda2h Posted June 13, 2021 Author Report Share Posted June 13, 2021 Well look at this… Decided to investigate and peeled the cover off and revealed a different model. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted June 13, 2021 Report Share Posted June 13, 2021 No it's same model but might explain why mode is not working. The original looks pretty worn 1 Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted June 13, 2021 Report Share Posted June 13, 2021 Yeah, could be a shorted/corroded contact under there. Post a pic of the circuit board and wiring diagram and charts on the inside of the box cover. There may be a way to set it to standard only. 1 Quote Link to comment Share on other sites More sharing options...
steeda2h Posted June 13, 2021 Author Report Share Posted June 13, 2021 Thanks for the help! Here’s the panel pictures Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted June 13, 2021 Report Share Posted June 13, 2021 Nope, that one does not have the mode dipswitch. 1 Quote Link to comment Share on other sites More sharing options...
steeda2h Posted June 13, 2021 Author Report Share Posted June 13, 2021 😩 I’ll try a new control panel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.