Jump to content

Balboa Vs500Z input resistance


Recommended Posts

Just picked up a used hot tub with the Balboa VS500 control. The Spa was operating before it was moved to my home. I just connected everything up and now my breaker trips instantly. My question is, can anyone confirm the resistance reading from the black "HOT" terminal to the "NEU" terminal on the board

I have removed the board from the housing and disconnected any wires from the "NEU". I have also removed the MOV protection (it tested OK) I'm measuring only 37 Ohms. Board looks perfect otherwise, I'm stumped at this point. fingers pointing to the terminals I measured across.

 

vs500z.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...