Sp12 Posted May 29, 2021 Report Share Posted May 29, 2021 I have a "no flow, chlorinator off" error in my hayward saltwater pool. It started with a "time to clean cell error"...so I unscrewed the chlorinator cell, cleaned it with a hose and screwed it back on. Then, when I turned the pool on, a bunch of whitish water was coming from the sides of the chlorinator cell. I figured that I hadn't tightened it enough, so I put the pool into service, screwed it on tighter, and turned it back on. Now I just get "chlorinator off, no flow" error, jets arent turning on and skimmer basket isnt filling with water. I tried to unplug the chlorinator cell and plug back in, and turn the cell around and screw back in, but no luck. I dont know if you can suggest anything? Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted May 29, 2021 Report Share Posted May 29, 2021 If the skimmer isn't filling then you don't have flow. Did you lose prime? Try bleeding the filter. Cleaning the cell is done with acid, not the hose. @jimmythegreek, @Pool Clown ... Quote Link to comment Share on other sites More sharing options...
Edd14 Posted May 30, 2021 Report Share Posted May 30, 2021 Has anyone seen a “flow on” indicator when there’s actually no flow?? I have a jandy acuapure. If my pump is shut off, the chlorinator continues to run. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.