Fingerstank Posted May 25, 2021 Report Share Posted May 25, 2021 So finally decided to move our tub and get back some of the deck we had been missing for 4 years now. Had to remove a pile of trees and excavate down into the lawn 6" . After we excavated and levelled the area we used a power tamper on the soil and added 2" of 3/4 crush then power tampered that down as well to get a nice solid base for the frame. Frame is 4"x 4" X 10' and joists are 2" x 4" 12" on centre. Just thought I would explain how we did this to help other folks out with installing a hot tub on gravel. Will add more pics once it's fully completed and finished, but here is the pics where the tub was and where it is now and the process Still need to do a few landscaping finishes and move the gazebo over into place 1 Quote Link to comment Share on other sites More sharing options...
Sandlotje Posted May 25, 2021 Report Share Posted May 25, 2021 Well done! I admire your woodworking skills! Thanks for sharing 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.