Jump to content

Tub Move


Recommended Posts

So finally decided to move our tub and get back some of the deck we had been missing for 4 years now.

Had to remove a pile of trees and excavate down into the lawn 6" .

After we excavated and levelled the area we used a power tamper on the soil and added 2" of 3/4 crush then power tampered that down as well to get a nice solid base for the frame.

Frame is 4"x 4" X 10'  and joists are 2" x 4" 12" on centre.

Just thought I would explain how we did this to help other folks out with installing a hot tub on gravel.

Will add more pics once it's fully completed and finished, but here is the pics where the tub was and where it is now and the process :)

Still need to do a few landscaping finishes and move the gazebo over into place 

20210519_165331.jpg

20210519_165345_0.jpg

20210523_161913.jpg

20210523_180334.jpg

20210523_183926(0).jpg

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...