Ndx Posted May 21, 2021 Report Share Posted May 21, 2021 Hi Guys, I know that we have multiple amazing techs here! Did any of you installed the Covana ? I have picked up used one, got it up and running, but manual says to not adjust the limit switch for the lowering value !? ( factory set ) I’m just worried that it will crush tub going to low ? thanks Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted May 21, 2021 Report Share Posted May 21, 2021 Never heard of it. Post a pic of the circuit board, wiring diagram, and equipment area. 1 Quote Link to comment Share on other sites More sharing options...
Ndx Posted May 21, 2021 Author Report Share Posted May 21, 2021 Sorry RD I was talking about electric pergola made by Covana Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted May 21, 2021 Report Share Posted May 21, 2021 Ohhh... 🤪 That makes sense now. Sorry, not familiar with those. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted May 21, 2021 Report Share Posted May 21, 2021 Why do you need to change/adjust the limit switch? Page 47: It seems pretty clear they don't want you lowering below factory defaults https://www.covana.com/docs/OASIS INSTALLATION MANUAL 2019 EN.pdf Just spoke with one of my guys that has done a few. He said that if it goes below factory default and it goes down to far it will just trip out the worm drive and stop once it hits something solid. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.