Jordan Hawkins Posted April 29, 2021 Report Share Posted April 29, 2021 Brand new waterway 2speed pump fitted today but when I press jets button on topside panal I only get high speed or off ?? When pumps turn of I get HL .. switched the wires around and get low speed but not high any idea what it could be ... only buttons on topside panel it : jet , jets , temp and light... I must add that pressing the second jets button it turns the light on and when pressing the light button it highers the temp, temp button lowers temp and 1st jet button either turns on high speed or off ... Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted April 30, 2021 Report Share Posted April 30, 2021 Post pics of circuit board, wiring diagram, and pump wiring. Do you have a voltmeter? Disconnect pump at board and test voltage for high speed and low speed. 2 Quote Link to comment Share on other sites More sharing options...
Jordan Hawkins Posted April 30, 2021 Author Report Share Posted April 30, 2021 Quote Link to comment Share on other sites More sharing options...
Jordan Hawkins Posted April 30, 2021 Author Report Share Posted April 30, 2021 So my dad has been playing around and the control panel seems to all be in order now so when pushing jet 1 nothing put a click on the circuit board , then push the snd jet button the high speed jets comes on ?? Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted April 30, 2021 Report Share Posted April 30, 2021 On the cover for the circuit board box is a wiring diagram. Post a picture, and of the circuit board from straight in front and of the red rectangle with white switches on the bottom of the board beneath the transformer. Quote Link to comment Share on other sites More sharing options...
Jordan Hawkins Posted April 30, 2021 Author Report Share Posted April 30, 2021 Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted April 30, 2021 Report Share Posted April 30, 2021 Set the switches as shown on the ""A" dipswitch settings" diagram. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.