Ashtynd Posted March 30, 2021 Report Share Posted March 30, 2021 (edited) Need help...spa is a dream makers spa with balboa rs101 control board. Pump will not run in low speed at all. It is now converted to 240v. Heater works with jets on. But pump will not run in low speed still. Edited March 31, 2021 by Ashtynd Added pics Quote Link to comment Share on other sites More sharing options...
cranbiz Posted March 30, 2021 Report Share Posted March 30, 2021 Post up some pictures of the control board, equipment area and of the circuit diagram. We need those to know your exact setup. Quote Link to comment Share on other sites More sharing options...
d.sebens Posted March 30, 2021 Report Share Posted March 30, 2021 Also a picture of the motor plate or confirmation that the pump is a 240v pump Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted March 30, 2021 Report Share Posted March 30, 2021 https://peoplelikeclearwater.com/wp-content/uploads/2017/01/CONTROL-SYSTEM-OVERVIEW-240V.pdf Quote Link to comment Share on other sites More sharing options...
Ashtynd Posted April 3, 2021 Author Report Share Posted April 3, 2021 It did work on low speed up until I drained and cleaned it. It works great on high speed. Just will not cycle into low speed. Any help would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted April 4, 2021 Report Share Posted April 4, 2021 Will it cycle off? Are there any errors on the topside? Do you have a multimeter? Unplug pump and check voltages on high (red) and low (black) speed to common (white) and verify that they are switching properly. Turn off power before unplugging pump. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.