Jump to content

2007 - 'Umbria' Spa, needs new Topside - help required to identify what I can fit?


Recommended Posts

We have a Hot tub that came with the house we purchased.

Generally all ok, but the controls have never had an overlay.

It has buttons that seem to be;

'Pump or Jets' on   / Lights On   /  Temp Increase   /  Temp decrease

There are Leds under that show when the Pump or Lights or Heaters are on.

The Topside is 110mm wide approx.  x 40mm Oval

I can see that the control plugs in onto the main PCB. This is marked GS Series.  Model - MGS500Z

My question is, what new unit can I use to replace the current Topside ? 

Looking at  Balboa info, it seems I would need a VL200 - 4 button model 118852

Searching the internet doesn't bring any up for sale, so could I use another model ?

Can I use a Topside with only 1 Temp button? Would the main PCB recognise other button versions and work correctly?

 

Thanks in advance

 

Joe

Balboa Control Unit.jpg

hot tub manuf plate.jpg

panel width 4 25.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...