Damned Undies Posted February 27, 2021 Report Share Posted February 27, 2021 I recently bought a house which came with this hot tub, and unfortunately have no documentation on make/model. Hoping an eagle-eyed hot tub guru can tell me what I have based on the pictures... Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted February 27, 2021 Report Share Posted February 27, 2021 Have you looked inside the equipment area for a MFG tag? At this point it doesn't really matter what brand it is. The control system is made by Gecko (SCLASS) Spa pack and looks to be a K19 topside control. Pumps, Jets and most plumbing parts are likely made by Waterway. Attached is the Gecko Sclass manual for troubleshooting and programming information. Troubleshooting Manual Here: https://issuu.com/geckomkt/docs/sc_cf_ce_as_service_manual_en Quick Reference Card Here: https://issuu.com/geckomkt/docs/ink19_quick-reference-card_en/1?e=14165552/31973995 1 Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted February 27, 2021 Report Share Posted February 27, 2021 52 minutes ago, Damned Undies said: eagle-eyed hot tub guru can tell me what I have based on the pictures... I know, I know... It's a hot tub!😉 1 Quote Link to comment Share on other sites More sharing options...
Damned Undies Posted February 27, 2021 Author Report Share Posted February 27, 2021 1 hour ago, CanadianSpaTech said: Have you looked inside the equipment area for a MFG tag? At this point it doesn't really matter what brand it is. The control system is made by Gecko (SCLASS) Spa pack and looks to be a K19 topside control. Pumps, Jets and most plumbing parts are likely made by Waterway. Attached is the Gecko Sclass manual for troubleshooting and programming information. Troubleshooting Manual Here: https://issuu.com/geckomkt/docs/sc_cf_ce_as_service_manual_en Quick Reference Card Here: https://issuu.com/geckomkt/docs/ink19_quick-reference-card_en/1?e=14165552/31973995 Thanks bigtime for the quick response and helpful info. Just heard from the previous owner that it's a Dynasty spa. Now I'm looking for a DIY solution so I can connect it to my WiFi network and control it remotely. Quote Link to comment Share on other sites More sharing options...
Damned Undies Posted February 27, 2021 Author Report Share Posted February 27, 2021 Identified. Dynasty CLB8N Specifications Size: 92″ X 92″ X 39″ Seating: 7 Gallons: 425 Jets: 70 Pumps: 2-6BHP Filtration: 100 sf with Ozone Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted February 27, 2021 Report Share Posted February 27, 2021 Need to see photos of spa pack to confirm it is an Sclass pack before going further. Also post photo of the schematic on the inside cover of the pack if there is one. If you go to dynastypartsxperss.com and key in your serial number it will give you the spas original build sheet and all its components. 1 Quote Link to comment Share on other sites More sharing options...
Damned Undies Posted February 27, 2021 Author Report Share Posted February 27, 2021 Thanks again for the quick reply, CanadianSpaTech. It's definitely an S-Class SC-CF Spa Pack Dual-pump system. Any idea what my options are for upgrading to a WiFi-enabled remotely-controlled system? I've seen some DIY options which are pretty involved and gut the controls, replacing with a UniPi controller. I've also seen Gecko's in.touch2, but looks like I'd need to replace this controller with one that's compatible with the in.touch2. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.