Jump to content

Hot Springs Limelight 2015 - issues with lights and water feature


Recommended Posts

Hello! We just bought a new home that came with a 2015 Hot Springs Limelight Flair tub. I have a couple issues I’m hoping someone can help me with. 

After finally figuring out how to turn on the water feature, we noticed that it appears to be ‘squished’ in the centre, only allowing water to pass through the edges - so instead of a smooth waterfall, it comes out like a V. Is there any way to fix this or would the ‘feature’ need to be replaced?

Secondly, we noticed that quite a few lights are out - a few in bunches in the same area - and some of the plastic caps over the lights are cracked, one is completely off and appearing like it’s shorting out the light (assuming water is getting at it). Are swapping out bulbs and the caps an easy thing to do on my own? It’s currently winter here so would likely wait until the spring to change them and caulk them as it’s very cold out. 
 

Thanks in advance. 

Link to post
Share on other sites

If you get lucky only the bulbs will be bad. If the socket is bad then you have to dig thru the foam to replace the whole thing. I had to swap all the bulbs amd 4 sockets on my flair plus rewire half of it but was worth it. I also replaced 2 corner bulb sets amd the fiber optic waterfall lights.  Backyard plus has best prices on the parts u need and you also need the tool it's only a few bucks. Tub needs to be drained to do it.  

For the waterfall get a plastic shim or toilet bowl shim amd wedge it in middle see if it helps the water sheer. How is the spacing across it

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...