cappo Posted November 25, 2005 Report Share Posted November 25, 2005 I have a redwood hot tub and am using a bromide/bromine shock to sanitize. I still have a "tea effect" (brown water from tannins in the wood leaching into the water) after 3 months of operation. I'm wondering if the bromine is contributing to this. Anyone have any experience maintaining wood tubs? Quote Link to comment Share on other sites More sharing options...
Dr. Spa Posted November 25, 2005 Report Share Posted November 25, 2005 The bromine is not contributing to it, but in a few more months the bromine will ruin the tub. Bromine is too strong of an oxidizer for wooden hot tubs. If there is no organic matter in the water for the bromine to oxidize it will eat away the wood. Quote Link to comment Share on other sites More sharing options...
Jim_The_Jim Posted November 26, 2005 Report Share Posted November 26, 2005 I have a redwood hot tub and am using a bromide/bromine shock to sanitize. I still have a "tea effect" (brown water from tannins in the wood leaching into the water) after 3 months of operation. I'm wondering if the bromine is contributing to this. Anyone have any experience maintaining wood tubs? I suggest you use copper/silver/zinc ions with chlorine. To help with the TEA effect you can dump in a bunch of pH up then drain it and refil it. Here is our instructions for new wood tub break in. For new wooden tubs The water will slowly turn brown as the wood cures and "teas" into the water. This is not harmful and is fine to soak in. If you wish to reduce this effect, you can put in two pounds of soda ash and run it for 48 hours with the filter cycles on. Drain and refil. It may need to be repeated as necessary. Do not use Bromine in a wood tub. It is too strong for wood, and will cause the wood to burn. Do not use Liquid chlorine or chlorine tablets (tri-chor) for the same reason. If the wood has hair like feathering, that is a sign of too much chlorine burning the wood. NEVER LEAVE THE TUB EMPTY FOR MORE THAN TWO DAYS. With a new tub the filters get clogged from the "tea". This tea contains resins from the wood that need to be soaked in a cleaning solution. I recommend soaking overnight in a solution of Cascade. One cup in five gallons of warm water (not hot). Rinse well and rotate filters often (about once a week) for the first month. That is why it is good to have a spare clean filter ready to go. copyright; The Spa Specialist inc Quote Link to comment Share on other sites More sharing options...
Brulan1 Posted January 27, 2006 Report Share Posted January 27, 2006 I have a redwood hot tub and am using a bromide/bromine shock to sanitize. I still have a "tea effect" (brown water from tannins in the wood leaching into the water) after 3 months of operation. I'm wondering if the bromine is contributing to this. Anyone have any experience maintaining wood tubs? Use a mineral and scale preventer like sparkalizer plus, Metal X, the new spa perfect for minerals ect... If the problem persists empty tub and start fresh using the mineral and scale preventer so the you can remove or coat the minerals. What happens is when your bromide mixes with minerals it discolors the water. I have a redwood hot tub and am using a bromide/bromine shock to sanitize. I still have a "tea effect" (brown water from tannins in the wood leaching into the water) after 3 months of operation. I'm wondering if the bromine is contributing to this. Anyone have any experience maintaining wood tubs? Oh, sorry I thought that the inside was wood. I recommend putting a liner in the tub believe it or not. It is a pain in the butt to do but you would propably be happier Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.