Jump to content

hibiscus spa


meatshield

Recommended Posts

Hey all, first time using a forrum page in general so sorry in advance for anything i get wrong. Today my partner and i got a second hand spa, brand is hibiscus. cant find anything online for it but long story short its got a control panel with air, jets, heat, cool, check, lights, and mode. the connection between the control panel and box is a ribon cable with crimp ends and re crimping it either gets the mode and air light flashing red and green, or one pump firing in 2 second bursts with the entire panel flashing. Anyone farmilliar with this system and or know how to get it working normally? Thanks in advance.

Link to comment
Share on other sites

It's likely your tub uses some off-the-shelf industry standard components. I suggest you take some photos of the control board, topside controller, and any other detailed photos you think might be useful then post them here.  There's a few helpful techs on this site who might be able to identify the specific spa-pack used in your tub and can provide some better guidance to get your tub back fully functional again 🙂

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...