Ryan W 0 Posted January 30 Report Share Posted January 30 My inground swimming pool has an SPA. This SPA is controlled by an Air Button. Please refer to the attached photo. It used to be turned on by pressing the button once, and turned off by pressing the button once again. But recently, it doesn't work well. To keep the SPA on, the button must be keeped pressed. Once the button is released, the SPA is turned off. Could you please help me to trouble shoot what causes this issue? Is it a issue of Air Button or the air line? Kind regards Quote Link to post Share on other sites
RDspaguy 646 Posted January 30 Report Share Posted January 30 Most likely it is the electrical switch that the air hose connects to. Quote Link to post Share on other sites
Ryan W 0 Posted January 31 Author Report Share Posted January 31 Thank you very much. How can I fix it? Quote Link to post Share on other sites
RDspaguy 646 Posted January 31 Report Share Posted January 31 Replace it. https://www.amazon.com/dp/B01N9O5IR1/ref=cm_sw_r_cp_awdb_imm_t1_306B9KZRQC4BRCFEHZ3R?_encoding=UTF8&psc=1 Quote Link to post Share on other sites
RDspaguy 646 Posted January 31 Report Share Posted January 31 Somewhere near the equipment you will find a box with the small tubing and pump wires running to it. Open it up and you will see the switch. Turn off power and replace it. 1 Quote Link to post Share on other sites
Ryan W 0 Posted February 1 Author Report Share Posted February 1 Thanks mate! Quote Link to post Share on other sites
Monroy32 0 Posted February 13 Report Share Posted February 13 Its look like an electric switch Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.