Jdoda Posted January 24, 2021 Report Share Posted January 24, 2021 Hi there I have a old siberien tiger 2003 ish based in uk. Everthing has stoped, control panel has no lights on no pumps going heater of etc. I have power to first circuit board with 2 push in relays. The jump cable from this has power in it to large circuit board. Is the fault likely to be the relays in the first board. I've taken them out (relays) and they click when power is put to them. No visible hot marks anywhere. If this makes sense any help would be appreciated John Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted January 24, 2021 Report Share Posted January 24, 2021 No, it doesn't make sense. Post some pics of these removeable relays, and the circuit boards. Do you have a mutimeter? Quote Link to comment Share on other sites More sharing options...
Jdoda Posted January 24, 2021 Author Report Share Posted January 24, 2021 This may help basically I have power in then to 2nd board via wire but not out below relay. Yes I have multimeter. Out of tub I can get the relays to click using external power. Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted January 25, 2021 Report Share Posted January 25, 2021 Stock photos don't help me see what is happening with your system. Post some pics of yours. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.