SwissArmyMike Posted January 21, 2021 Report Share Posted January 21, 2021 I have a Vita Spa Duet LD15 and I have a persistent ICE error on the top-side panel. I have a new circuit board and both sensors have been replaced. The last time it was serviced, the tech did sell us a used top-side panel because he said ours was bad. We have gone through every combination of waiting 5 minutes unplugged, 20 minutes, tried resetting and rebooting, nothing works. It just flashes ICE. Any thought on what could be causing this issue? Important to note: I live in Florida, there is no way that the temp of the water is that much different from the outside ambient temp. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted January 21, 2021 Report Share Posted January 21, 2021 What year is it? Pre 2010 they used circuit boards made by http://www.consumerengineering.com/ Please post photos of the circuit board and schematic on the inside cover if there is one. Also of the topside control. LD-15 Manual here: https://www.manualslib.com/manual/187413/Dm-Industries-Ld-15-Series.html?page=13 2 Resets page 9 https://www.manualslib.com/manual/187413/Dm-Industries-Ld-15-Series.html?page=9#manual Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.