Sspoke Posted January 16, 2021 Report Share Posted January 16, 2021 I replaced a diverter valve on my Catalina but when I turn on the third level jets it pops up and out. Is there something to hold this down? thanks in advance for the help! Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted January 16, 2021 Report Share Posted January 16, 2021 Remove the cap/handle (the black and chrome part) from the clear piece underneath. I think you will find that the threaded part has broken off the clear part and half of it is still attached to the collar where it threads onto the part with the black O-ring. Try and get the piece that is around the the collar next to the black o-ring to unthread. Once removed you should see the threads for the new cap that sits under the handle to thread onto. Quote Link to comment Share on other sites More sharing options...
Sspoke Posted January 17, 2021 Author Report Share Posted January 17, 2021 Thanks CanadianSpaTech! I got it going! Appreciate it! 1 Quote Link to comment Share on other sites More sharing options...
Catalina owner Posted December 20, 2021 Report Share Posted December 20, 2021 Where did you buy the replacement diverter valve? I need 6 of them, need them to include the cap and the guts that slide into the hole. Current ones just turn and think they broke off where the clear plastic tab slides up and down in the lower plastic piece. Where can I get new ones? Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted December 20, 2021 Report Share Posted December 20, 2021 Please start your own post Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.