Ndx Posted September 7, 2020 Report Share Posted September 7, 2020 Hi Guys, This is fresh fill after purge with Ahh Some, Tub was flushed with pure water and filled. I only used DryAcid and Dichlor no soak time yet. pH 7.8-8 ALK 60-70 CH 90 Tested with Taylor Kit Every time I turn jets on and stop them, my water looks like in pictures, 5 minutes later it looks crystal clear! It really looks like kinda air bubbles are floating on surface and sticking together or dust.... I tried to capture this in clear glass but its instantly gone. ( previous fill was same? Bad Dichlor ? dry Acid ? ) Just feel like dumping water yet again, frustrating I will pull microscope to this tomorrow Thank you for suggestion Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted September 8, 2020 Report Share Posted September 8, 2020 Looks like calcium coming out of solution from high ph. Lower ph and see if it clears. 1 Quote Link to comment Share on other sites More sharing options...
Ndx Posted September 10, 2020 Author Report Share Posted September 10, 2020 Lowered to 7.6 and maybe there is actually more... I wonder if this the calcium sterate. Issue with pipes. I have some Seakler comming tomorrow will see if it helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.