BWhitens Posted July 20, 2020 Report Share Posted July 20, 2020 Kids pushed Jet switch on and off multiple times. No longer works. Pushing switch does illuminate the switch panel and display the jets graphic on and off. The rest of the buttons work as well (temp up/down). No signs of burnt wires or areas on the circuit board. The Jet Pump does work...ran power directly to test. Appears as though the both the switch and the pump are working as they should. Assuming something with the circuit board. 1999 Tiger River Bengal M. Any help would be GREATLY appreciated. Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted July 21, 2020 Report Share Posted July 21, 2020 Sounds like a toasted relay. I don't think tiger river has any fuses on the main pump. Unless there is some lockout I am not familiar with. @castletonia, got any insights? I would say pull the board and bring it to an electronics repair shop, if you can find one open that is. Post a pic of the circuit board. Quote Link to comment Share on other sites More sharing options...
BWhitens Posted July 22, 2020 Author Report Share Posted July 22, 2020 Thanks for the response. I'm betting you're correct. I wish I knew which piece was the relay, maybe could replace it without removing the entire panel. Tub is built into an indoor room, a bit tougher to work on since all is below floor/deck level. Thinking about simply hooking up waterproof external switch up to the jet pump and done with it. I have a good safe spot on the wall to put a switch. Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted July 22, 2020 Report Share Posted July 22, 2020 You can't repair the board without removing it. The relay is soldered in from the back. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.