mjnp06 Posted July 6, 2020 Report Share Posted July 6, 2020 I turned my spa down to 70F last week before vacation. When we got home the temp read 105F. I pressed the temp down button and the display said it was set to 70F but the water was definately over 100. I stut power off for a few minutes to see it that would reset everything, no luck. So I left the power off overnight, the water was much cooler but it still read 105F. Anyone have any ideas? thanks Mike Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted July 6, 2020 Report Share Posted July 6, 2020 Check your filter cycle settings. It is likely running got to long and the pump it's self is is getting hot and heating the water up from the inside. Won't take long with this heat outside Quote Link to comment Share on other sites More sharing options...
mjnp06 Posted July 6, 2020 Author Report Share Posted July 6, 2020 I'll give a try. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.