Handyman9255 Posted July 2, 2020 Report Share Posted July 2, 2020 Viking spa had a tripped gfi breaker , reset it spa started to work. I set it to economy mode and F2. Hasn’t shut off since. Two days. Powered down from the breaker panel same results. Temp set to 80 and I think it is still heating though as temp days 102.....Help please! Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted July 2, 2020 Report Share Posted July 2, 2020 Sounds like a stuck relay. Post a pic of the circuit board and equipment. Quote Link to comment Share on other sites More sharing options...
Handyman9255 Posted July 2, 2020 Author Report Share Posted July 2, 2020 RDspaguy, here you go. I powered it down last night from the main breaker one more time and it "seems" ok now but I suspect this problem will come back. Let me know what you think, and thanks much! Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted July 2, 2020 Report Share Posted July 2, 2020 And pics of equipment (pumps, ozonator, etc.)? Also, on the inside of the circuit board cover is a wiring diagram with dipswitch settings. Please post a pic of that. Is it a new spa or new control pack? Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted July 2, 2020 Report Share Posted July 2, 2020 @RDspaguy stuck pump button on topside? Hot and gooey out there. Could he disconnect the topside and see if it runs semi normal...like me 1 Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted July 3, 2020 Report Share Posted July 3, 2020 As I recall, that system should run automated functions without the topside. Usually when a button sticks or shorts it will continually cycle low-high-off, but anything is possible. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.