Overthehedge Posted July 1, 2020 Report Share Posted July 1, 2020 Hi all, Have brought a pre owned hot tub, got it wired in, after 4 hours it doesn’t seem to be doing anything at all (still feels completely freezing) is this normal? There’s air bubbles coming out of the bottom of the tub , also had a look in the “engine” compartment but a complete novice and not really sure what I’m looking at, there’s a really small tube with water occasionally running through it, there’s also bigger tubes with nothing much seem to be going on (could be wrong but can’t really see anything through them) thanks for any advice Quote Link to comment Share on other sites More sharing options...
Overthehedge Posted July 1, 2020 Author Report Share Posted July 1, 2020 Update: found a bubble in that big pipe so released the air a little, fixed a leak the other end by tightening it, reset the heater and checked the control panel and heater light is on (quite impressed with myself! Found similar posts on here) I’ll wait and see if that’s made any difference ? Quote Link to comment Share on other sites More sharing options...
Cusser Posted July 2, 2020 Report Share Posted July 2, 2020 Air in system will cause low pressure, so pressure witch to heater will not activate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.