Jump to content

Tim


TimRac

Recommended Posts

I have a Jandy Lite 2 heater that is arounf 15 years old. Never had a problem until this season. The display was missing an occaisional LCD pixel. Yesterday, it shut down and none of the buttons would work, I powered it off and on at the switch and now the panel fails to display anything. The control board power light is lit. I tried troubleshooting , there is power from the transformer but no power at the fireman switch when the 2 wires are connected but 24 volts on one leg when disconnected.  I thought it was a bad display panel until I tested the voltage at the fireman switch. I don't want to buy a control panel if it 's a bad board. 

Link to comment
Share on other sites

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...