RDspaguy Posted June 6, 2020 Report Share Posted June 6, 2020 In the dipswitch settings there is a topside option, try the other option. Post a pic of the circuit board. Quote Link to comment Share on other sites More sharing options...
Hicks6 Posted June 12, 2020 Author Report Share Posted June 12, 2020 Thanks for the response. Here are the pictures of the board and the new topside controller. I don't see any dip switches anywhere. Is it on the board? Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted June 12, 2020 Report Share Posted June 12, 2020 The jumpers are just to the left of where you plug in the new topside under the round black cap. You will see 3 or 4 black tabs that will have 3 brass like pins but the tabs will only cover 2 of the pins...when they cover 2 say the left 2 they might turn something on if they cover the right 2 pins they might turn something off. Inside cover of the pack should have what the settings are but I don't see anything 1 Quote Link to comment Share on other sites More sharing options...
Hicks6 Posted June 12, 2020 Author Report Share Posted June 12, 2020 Okay, I follow you. The schematic shows what the jumper settings are supposed to do. Is that going to be different now that I have an aftermarket topside? I guess its going to be a matter of trial and error to see if I can get the right configuration? I really appreciate the help by the way. Thanks very much. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted June 12, 2020 Report Share Posted June 12, 2020 You ordered a K35 topside...the jumper options are for either a TSC 44 or a TSC 19...might be why buttons don't line up and you can't adjust the temp. 1 Quote Link to comment Share on other sites More sharing options...
Hicks6 Posted June 13, 2020 Author Report Share Posted June 13, 2020 Okay, now this all makes sense. So this board will only work with either the TSC 44 or 19. Since I have 3 pumps, that means that only the TSC 44 will work. I'll have to return the K35 and order the right one. This should solve everything once and for all. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted June 13, 2020 Report Share Posted June 13, 2020 Quiz the seller and make sure you are getting the right one to match that pack. TSC 44 is for La Spas but there may be a cheaper generic TSC number that will work with that pack 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.