Billydreammakerx400 Posted February 2, 2020 Report Share Posted February 2, 2020 I’ve had a dreammaker 400x for a few years now with no issues. It’s 110v plug in and recently it has been overheating and gets an OH alarm on controller it will run a day or so then shuts down and gets ice cold until I reset the controller. I’ve went thru the basics changed the filter, made sure pump doesn’t have air in it, temp is actually extremely hot. I have good flow out of the jets and it 30 degrees out so outside influence is not the issue. I’ve read a few forums people have had same issue but no one ever seem to post how they fix the problem. Im leaning towards a relay on the board that’s not open when heat is not called. Not sure if anyone has had any luck fixing this issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.