CanadaGirl Posted November 8, 2019 Report Share Posted November 8, 2019 Hello everyone, We bought a Caldera Geneva spa a few months ago and have been more than pleased with it. We also bought a drop test kit as recommended here. We started out on dichlor only but quickly ran into issues of high readings and potential over stabilization. As a result we switched to dichlor then bleach on our water change about 3 weeks ago. Got our CYA to 30-40ish based on measuring a fixed amount of dichlor the switch to plain 8.25% bleach. Bleach is added slowly with the the water running. Noticed today that the area where I normally add the bleach (in middle as much as possible but really over lounger) there is a rough patch. Worried I’ve damaged the shell from the bleach! I didn’t think this was possible, but maybe it settled there? Our water chemistry is as follows: CH about 100 TA: 40 pH: 7.5 and stable CYA: 40ish Any advice is welcome! I don’t want to switch back to dichlor but don’t want to risk damaging our new tub either. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.