navman5000 Posted December 28, 2018 Report Share Posted December 28, 2018 Hey everybody new to this forum... so howdy! So have been working on my spa it was leaking where the couplers join the housing. So ordered new housing, o rings, new pump seal installed by dealer. Put it together and the couplers still leaked. Ok so sealed with clear silicon in the couplers and put it back together. Only one coupler is leaking so took it apart ( getting good at taking apart and putting together) put clear silicon and retightened let dry over nite. Today filled tub and hit the jet button and it still leaked some drops. Grabbed my channel locks and put some ooph to it and the coupler split open water gushing. So Hot Springs how do you put a new coupler on to the flex pipe top location or should I call the dealer to make repair? This tub was purchased in 1995 and has been a very good tub for us for a long time. Needless to say we are really bummed. Anybody got anything on this? Navman Quote Link to comment Share on other sites More sharing options...
Tubber49 Posted December 30, 2018 Report Share Posted December 30, 2018 If I understand your post correctly it seems like the split coupler I mentioned in another post would work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.