Stavros Posted December 10, 2018 Report Share Posted December 10, 2018 Hey gang, it took me a very long time to determine what was tripping our hottub breaker to eventually figure out it was pump #2. I can run pump 1 on low and high, but as soon as pump 2 is turned on it trips the breaker. I then have to wait almost a full day before I can turn the breaker on again, almost as though there is water I have to wait out to try before it will work again. Any insight you might have would be greatly appreciated. Sincerely Steve Quote Link to comment Share on other sites More sharing options...
Hot Spring Official Posted December 13, 2018 Report Share Posted December 13, 2018 Have an electrician measure the pumps current draw and leakage current, then check the circuit breaker to see why it will not reset. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.