DR2244 Posted October 15, 2018 Report Share Posted October 15, 2018 (edited) I have a Sovereign II (around 1999 or 2000) that has a leak I can't track down. It doesn't drain the tub lower than these two jets (photo 1) and the water leaks out down by the large black hose. It only leaks at the bottom of that hose and I can't find water anywhere else - I've ripped out behind all those jets and others and I don't see water coming anywhere in that area so I assume it's traveling somewhere along that big black hose but I can't figure out where that might be. What is that hose? It looks like it just houses a smaller hose/drain (??) I can't find any sort of plumbing diagram that will show me. Any direction/info much appreciated! Edited October 28, 2018 by DR2244 incorrect model Quote Link to comment Share on other sites More sharing options...
Hot Spring Official Posted October 16, 2018 Report Share Posted October 16, 2018 That black hose is to vent the hot air off the jet pump. Since the leak stops at those jets, it should be somewhere around them. Be careful with the foam, you don't want to hurt yourself or your spa digging in the foam. Quote Link to comment Share on other sites More sharing options...
BoredSalesman Posted October 22, 2018 Report Share Posted October 22, 2018 Check your air intake valve inside your equipment compartment. If it takes on water it can cause the spa to leak in that area. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.