Cupilot Posted October 6, 2018 Report Share Posted October 6, 2018 Good afternoon. Back in June, my HotSprings Envoy KK went inoperative. At that time, it was no big deal, summertime it hardly gets used. Now that its fall, the cooler nights are coming. So Im looking at my tub. Heres what its doing: Nothing. Except intermittently flashing the panel light on the control panel (like a florescent light with a bad bulb). Ive pulled the control panels, inspected for signs of arcing, corrosion, cleaned my ground connections, and check both legs of my power at the tub. All Ive got is a flickering light (not an indicator, the one that lights the panel itself). I dont even have a power light on. Any ideas? Before it completely died on my, every once in a while it would do this, but a breaker reset would get it back online, and I still had lights, etc running. Help me out here, everybody!! Quote Link to comment Share on other sites More sharing options...
alaska_guy Posted October 31, 2018 Report Share Posted October 31, 2018 Sounds like the main board is bad. 120v controls the pumps, lights and control panel. The 220v controls the heater. I would pony up and contact a dealer and get the part ordered ASAP. We just got our first snow here and if the tub went cold for whatever reason the tub would be worthless come spring. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.