Jump to content

Hot Tub too hot


Recommended Posts

Ambient air temp and direct sun light can cause your water to heat without the heater. It's probably nothing but if you'd like to check it you'll need to drain off a little water and add fresh to bring the temp down below your set point, somewhere in the low 90's is good. Once the it's cooled, set your temp to 2 degrees above whatever the current reading is. If the unit runs the temp up to the set point and cuts out, no worries. If it keeps going past the set point by more than a degree then you may have an issue. Do it at night if you can when the temp outside is below what your water temp becomes once you cool it. 

Like I said though, it's probably nothing. Good Luck.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...