BrianE Posted June 9, 2018 Report Share Posted June 9, 2018 We have a Clearwater Divine series. Circulation pump and blower will not come on. I moved both to pump 1 connection on the circuit board and they both work. Pump 2 works fine. Looking for where to start troubleshooting. The controller is a Balboa VS thanks Quote Link to comment Share on other sites More sharing options...
Marco Pulone Posted June 11, 2018 Report Share Posted June 11, 2018 so the jet pumps 1 and 2 both work, but the circulation pump and blower dont work. Probably a stuck relay or two, or both motors are dead. Quote Link to comment Share on other sites More sharing options...
BrianE Posted June 14, 2018 Author Report Share Posted June 14, 2018 Both motors are good, I plugged them into pump 1 position on the board. So I will focus on the relays. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.