Jump to content
DavidL

Hot Springs Jetsetter no power

Recommended Posts

My Jetsetter ix a 2003 model with IQ2020 CONTROL PANEL. Spa was wirking perfectly , but i decided to do a water change and cleaning. I disconnected the power cord and proceeded with the draining. After i refilled it , i plugged it in, the gfci is reset but no power light on the spa and nothing works. I pulled the panel cover, and checked the power at the connections an if showed 122  v. What else might need reset, or replaced?

Share this post


Link to post
Share on other sites

Get a Free Hot Tub Quote

Save time and money by receiving multiple, independent quotes for a hot tub.

I would look on the back of your control panel for any obvious burn marks on the board (black).  I would check fuses to verify they are ok, also check for bad solder joints etc.  If you have already done all that someone more knowledgeable than myself about the spa would have to chime in.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×