DavidL Posted June 3, 2018 Report Share Posted June 3, 2018 My Jetsetter ix a 2003 model with IQ2020 CONTROL PANEL. Spa was wirking perfectly , but i decided to do a water change and cleaning. I disconnected the power cord and proceeded with the draining. After i refilled it , i plugged it in, the gfci is reset but no power light on the spa and nothing works. I pulled the panel cover, and checked the power at the connections an if showed 122 v. What else might need reset, or replaced? Quote Link to comment Share on other sites More sharing options...
alaska_guy Posted June 4, 2018 Report Share Posted June 4, 2018 I would look on the back of your control panel for any obvious burn marks on the board (black). I would check fuses to verify they are ok, also check for bad solder joints etc. If you have already done all that someone more knowledgeable than myself about the spa would have to chime in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.