JohnB Posted May 25, 2018 Report Posted May 25, 2018 I have a pretty old (1998) California Cooperage tub, Model 105. Replaced the pump and heater last year and all was working perfect, up until a couple weeks ago. The filter cycle, which normally runs for 3 hours every 12 hours, has been cycling ON and OFF constantly during that 3 hour period... For example, during the 3 hour filter cycle, the pump (and sometimes the heater) will run for only about 2 minutes, then will shut off for about 20 minutes. This happens constantly throughout the 3 hour period. I initially though it was the pump overheating, but it does not get hot and there are no error codes. Also, if I manually turn on the pump, high or low, with the control panel, it runs totally fine for as long as I want it to. It has no problem maintaining the set temp throughout the day either. Could it be a circuit board issue? I believe its the original board still...Thanks in advance! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.