Jump to content

changing a 220 volts to 120 volts for a 1 1/2 hp hayward motor


MITCH 2

Recommended Posts

I just bought a 1 1/2 Hayward pool pump .inside ,the connections  are setup for 220 volts from the factory .it's very clear that the black plug has to be moved so the arrow is pointing toward   115 volts .so moved the plug accordingly . my question is this I have a black wire and a white wire and a ground wire . I connected the ground wire to the green connection . now do I connect the black wire to terminal number one "left to right "and the white wire to terminal number two ? counting  from left to right I have 1-2-3-4-5 terminals . which two terminals go to the black wire and the white wire ? thank you for your help .mitch 2 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...