Tomp Posted March 18, 2018 Report Share Posted March 18, 2018 Changed it hot tub motor ... Should've been a simple job. Bearings bad in old motor. Unhooked old motor replaced it with new motor... Nuttin Many different error msgs Referring to sensor, or dry heater, but I can't get this new motor to even turn on. Thought I wired it wrong... Then double and triple checked it even swapped the wires into every conceivable combination Any ideas? Quote Link to comment Share on other sites More sharing options...
Jersey Hot Tub Repair Posted March 27, 2018 Report Share Posted March 27, 2018 Your original bad motor may have put a heavy draw on your tub and blown a fuse. I've seen that happen several times. Check the 20, 25 or 30AMP slo-blo ceramic fuses. Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.