robquick Posted December 10, 2017 Report Share Posted December 10, 2017 Hi, Had my tub for 5 years and always used the Dichlor/bleach method, it's always worked well however I've always suffered with high ph. Recently I changed the water and started with the ph much lower than normal (set to 7.2). Ever since I did this the ph seems to be much more stable and stays around 7.2. However, my Alk is at 75 which is much higher than I used to run it................2 questions really. Is it ok to run the Alk at 75 ? If not, how should I bring it down ? Should I raise the ph by aeration and then use ph reducer to bring the Alk back in line ? Thanks Quote Link to comment Share on other sites More sharing options...
mrmodo Posted December 14, 2017 Report Share Posted December 14, 2017 From what I understand here as long as you PH is stable at the correct level 7.4 - 7.6, then your TA level is fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.